CHANGE THROUGH INNOVATION
If you want to change the world and innovatively shape the future, you have to define clear goals!
OUR GOALS ARE
PROTECTION
SUSTAINABILITY
QUALITY
HIGH PERFORMANCE
The material
The material - a patented AVIBAS membrane
The technical structure of the 5-layer material used is novel and uniquely efficient. The patented AVIBAS membrane consists, among other things, of a processed silver-carbon fabric, which due to the unique HIGH-PERFORMANCE demonstrably inactivates over 90% of viruses within 45 seconds and additionally disinfects itself.
In collaboration with researchers at ZHAW, the technology and the textile have been systematically improved to achieve higher efficiency within minutes. In addition, a test procedure was established at ZHAW to quantify the sterilization efficiency of such cleaning masks.
TEST TRIAL
The test procedure
The test procedure together with the ZHAW - Zurich University of Applied Sciences consists of working with an extremely high contamination. It is tested with an extreme intensity of 107 to 109. An intensity that is not reached in nature under real conditions. Phages were bred and used that are many times more resistant (more persistent) than e.g. SARS viruses (Covid). According to our information, no other manufacturer tests its mask materials under these extremely difficult conditions for masks.
SCIENCE & RESEARCH
Scientifically backed:
Since the beginning of the pandemic, we have been researching the further development of these masks on the one hand and the characterization of the efficiency, safety and material properties of antiviral technology on the other. For this purpose, we have developed a test method together with the ZHAW, which tests pandemic masks under high conditions.
CERTIFICATION
CERTIFICATION
The certification of our mask (EN 14683 type IIR, certification for a medical product of class 1) had to be carried out by a laboratory certified by the EU (see attached certificate incl. test number). Thus, our product already meets a much higher standard (a class 1 medical device) than the standard according to EN 149 for FFP 2 masks (N95.KN95).
Our mask, as a medical device, of course also fulfills the most important part of the FFP 2 mask, the filtering effect from the outside to the inside (see attached manufacturer certification). While for OP masks the emphasis on the filtering from the inside to the outside was specified in the standards. Of course, we have therefore also integrated the so-called FFP 2 filter in our innovation.
